NFC Sticker Tag for iPhone & Android Built-In RFID - 18mm Square

Fully complies with NFC Forum Type 2 Tag and ISO/IEC14443 Type A specifications using High Frequency (HF) 13.56MHz.

Stick on existing badges for instant RFID based attendance. Very small size allows use on assets large & small - supporting fast inventory counts.
Don't have software? Consider Cloud-In-Hand® mobile solutions.

Use this tag with apps like iScanBrowser, and Cloud-In-Hand® Mobile Grid, that supports built-in RFID-NFC reader in iPhone 7, 8, X and Android devices.

The idChamp® RS4 BLE RFID Reader / Writer can read and write NDEF data with this tag using iPads and iPhones, as well as even older units that do not have a built-in NFC-RFID reader.

Contact us for logo printing and custom printing on the tags.

• 18 x 18 x 0.4 mm (Maximum thickness at the point of chip within the inlay. non-chip area thickness is about 0.1mm)
• PET Polyethylene terephthalate [aka poly(ethylene terephthalate)] provides excellent water and moisture barrier
• Aluminum antenna
• peel-and-stick adhesive back
• Contactless transmission of data and supply energy (no battery needed) Operating distance: up to 1.5 m (depending on antenna geometry)
• Operating frequency of 13.56 MHz
• Data transfer of 106 kbit/s
• Data integrity of 16-bit CRC, parity, bit coding, bit counting
• Operating distance up to 100 mm (depending on various parameters as e.g. field strength and antenna geometry)
• 7-byte serial number (cascade level 2 according to ISO/IEC 14443-3)
• UID ASCII mirror for automatic serialization of NDEF messages
• Automatic NFC counter triggered at read command
• NFC counter ASCII mirror for automatic adding the NFC counter value to the NDEF message
• ECC based originality signature
• Fast read command
• True anti-collision
• 50 pF input capacitance
• NTAG213: 180 bytes organized in 45 pages with 4 bytes per page, 144 bytes freely available user Read/Write area (45 pages)
  Ask us about NTAG215, NTAG216 If you want more memory 540, 924 bytes organized in 135, 222 pages - 504, 888 bytes freely available user Read/Write area (126, 222 pages)
  4 bytes initialized capability container with one-time programmable access bits
• Field programmable read-only locking function per page for the first 16 pages
• Field programmable read-only locking function above the first 16 pages per double page for NTAG213 or per 16 pages for NTAG215 and NTAG216
• Configurable password protection with optional limit of unsuccessful attempts
• Anti-tearing support for capability container (CC) and lock bits
• ECC supported originality check
• Data retention time of 10 years
• Write endurance 100,000 cycles
• Manufacturer programmed 7-byte UID for each device
• Pre-programmed Capability container with one-time programmable bits
• Field programmable read-only locking function
• ECC based originality signature
• 32-bit password protection to prevent unauthorized memory operations

Note: these tags are designed for application on a non-metallic surface, and do not read when applied directly to metal. Ask us about on-metal RFID form factor, and other chip types for this same form factor, we can provide virtually any RFID HF and UHF tag.